I have lived
Wed Jul 03 10:50:45 +0000 2019Guess what happens when you try to invoke Array.join() in Firefox from a WebExtension.
If you guessed "you get TypeError originating, for some insane reason, from ext-webNavigation.js, which tries to use the browser chrome for some even more eldritch reason" then you're in *luck*
Wed Jul 03 19:42:06 +0000 2019Replying to @m0rb and @whitequark
carriageless carriage
Thu Jul 04 00:32:03 +0000 2019Replying to @nabijaczleweli
Ah, yes. Solid packaging, Nothing quite like it to inspire confidence and trust in your customers.
Fri Jul 05 15:14:59 +0000 2019Replying to @thecoshman
or just "break things", IME
Sat Jul 06 21:10:28 +0000 2019Today in "I watched a video where they cooked, and severely overextrapolated": two (one pictured) communist potatoes, egg, egg (backup), and a masheur.
Sat Jul 06 21:11:06 +0000 2019Replying to @nabijaczleweli
And now in she goes into the whatever that thing's called, who the fuck knows, yielding sub-par, localised browning, cutting quite well with acceptable separation and pull, but it also just crumbles unsettlingly.
This calls for the backup egg!
Sat Jul 06 22:13:33 +0000 2019Replying to @nabijaczleweli
and by "who the fuck knows" I mean I asked around and this is the kind of answers I got
Sat Jul 06 22:20:26 +0000 2019Replying to @nabijaczleweli
With the second egg this is now the consistency of mostly-cooked tomato sauce, and I'm pretty sure I've committed a grave mistake somewhere
Sat Jul 06 22:34:46 +0000 2019Replying to @nabijaczleweli
Better browning this time, okay separation, still crumbly, still lacking.
The best part of this were the severestly cooked parts in the overflow, so this Device is a failure en general.
Sat Jul 06 23:24:34 +0000 2019Replying to @nabijaczleweli
And so into the pan it goes! It behaves weirdly here, too, but at least it tastes better so
Sun Jul 07 00:46:20 +0000 2019Replying to @nabijaczleweli
Here's the yield (sans one and an 'alf Machine pieces which got vored in the mean-time). Edible: yes. Worth the hassle: definitely not following the same prep.
Sun Jul 07 01:33:05 +0000 2019Replying to @nabijaczleweli
business in the front, jank in the back
Sun Jul 07 17:36:05 +0000 2019Replying to @nabijaczleweli
guess whom it took over fifteen minutes to debug the damned unconnected output terminal
Mon Jul 08 21:19:24 +0000 2019Replying to @atomicthumbs
DшD what's this
Mon Jul 08 22:52:32 +0000 2019Replying to @nabijaczleweli
This deathly contraption was, by all accounts, a surprisingly (non?)resounding success! Which is to say, that, over the best part of two hours' using the PSU to run that tape, the fan, when it kicked in, was quieter than its cooling of my knee.
Tue Jul 09 00:15:28 +0000 2019hrm
Wed Jul 10 22:08:01 +0000 2019back from twitter jail and who'd've thought implementing CPUs(? do ISAe qualify as CPUs?) could be... fun?
Sat Jul 13 09:59:48 +0000 2019Replying to @nabijaczleweli
🙈 we assemblin' 🙈
Sat Jul 13 23:07:28 +0000 2019Replying to @FreyjaErlings
Looks like z0nesama on Tumblr / z0ne on Twitter? (NSFW)
Tue Jul 16 10:55:10 +0000 2019Replying to @FreyjaErlings
Following that path and searching for the image name lead to this post linked on some Chinese forum: http://kindahornyart.tumblr.com/post/141088975616/quick-thing-i-did-for-the-thread-last-night
Tue Jul 16 11:29:40 +0000 2019Replying to @nabijaczleweli
hehehe, working emulator time
Wed Jul 17 13:45:15 +0000 2019Replying to @nabijaczleweli
Now silicone-free!
Wed Jul 17 16:44:49 +0000 2019Replying to @nabijaczleweli
Now with emulators right in the docs, too! https://rawcdn.githack.com/LoungeCPP/pir-8-emu/doc/pir_8_emu/micro/index.html#examples
Fri Jul 19 02:05:54 +0000 2019Replying to @greenTetrah, @Twitter and @TwitterSupport
If you're using a browser, you can change your UA to old Opera or IE11 to get the old design
Fri Jul 19 19:02:49 +0000 2019Replying to @nabijaczleweli
M8 threaded rod fits perfectly into the top clamp hole of a breaker, who'd've thought about this delightful usecase!
Sat Jul 20 18:50:09 +0000 2019Replying to @nabijaczleweli
Now, having installed (then removed, taken apart and filled with delightfully purple bearing lube, and put back together) an eldritch contraption on this chomker of a drill, it's time to Drill Holes Badly™
Sat Jul 20 20:17:12 +0000 2019Replying to @nabijaczleweli
I used a fucking level and it's still visibly off-kilter, which is a damned achievement, more-so due to its wobbling problem.
Sat Jul 20 23:04:32 +0000 2019Replying to @nabijaczleweli
I'd intended on slapping some cork under there, but this leftover foam was closer to the front of the wardrobe, so into chonks (with a small one stuffed in afterward) it goes, and under my expert three-screw mounting solution because the marker interfered with the output terminal
Sun Jul 21 00:22:14 +0000 2019Replying to @nabijaczleweli
ready to be arbitrarily exclusionary based on otherwise-meaningless character strings!
Sun Jul 21 20:49:32 +0000 2019Replying to @nabijaczleweli
I actually genuinely don't know how I managed to get this one *so* off
Mon Jul 22 01:17:29 +0000 2019Replying to @nabijaczleweli
The wiring came out surprisingly alrightly tbh
Mon Jul 22 18:12:08 +0000 2019Replying to @nabijaczleweli
had to poke a meter into the output terminal to figure out the polarity because in my infinite wisdom I marked it only on the foreface, and it was still at 5.7 volts? after two weeks??
Mon Jul 22 20:29:32 +0000 2019Replying to @atomicthumbs
if they're anything like me, they're already very nervous systems
Mon Jul 22 21:49:00 +0000 2019her.
Tue Jul 23 00:03:54 +0000 2019Replying to @AssembledGhost
cow juice good
Tue Jul 23 20:46:49 +0000 2019Replying to @nabijaczleweli
Unbagging time, and this tape seems to come with free goop (the IP65 rating's good for something at least, though sanding it matte didn't make for a good diffuser), and soldered together every half-meter, a fortuitous coincidence, given that I need exactly 19 pieces for this run!
Tue Jul 23 20:54:04 +0000 2019Replying to @nabijaczleweli
I can confidently say that the goop is the strongest part of this damned thing
Tue Jul 23 21:45:02 +0000 2019Replying to @nabijaczleweli
Shot each intensity level to compare, and the only thing that changed across all five pictures is the brightness of the door glass :v
Tue Jul 23 22:25:43 +0000 2019Replying to @Peter_Workman
Yeah, I omitted them for the output side this time because it was to never go above 12V, but yeah, lesson def. learned
Tue Jul 23 22:31:00 +0000 2019Replying to @Foone
#define UNICODE_SONG_BSD MARIO_GAMEOVER
this software is good actually
Tue Jul 23 22:57:16 +0000 2019Replying to @nabijaczleweli
not the greatest picture but the solder mask was just... missing? in a lot of places, and not only in scratches like this but whole chunks? I'm learning the true meaning of IP65
Tue Jul 23 23:16:37 +0000 2019Replying to @nabijaczleweli
At any rate, with the wiring handled, the door strip sexion is now completed!
Wed Jul 24 00:19:08 +0000 2019Replying to @nabijaczleweli
iconic OC
Wed Jul 24 23:48:11 +0000 2019WTKMA this absolute icon in a mid-thigh-split burgundy dress and cargo shorts
Sat Jul 27 12:09:04 +0000 2019well this sure is a package ?
Mon Jul 29 10:39:20 +0000 2019Replying to @nabijaczleweli
Couldn't find a model online, so https://github.com/nabijaczleweli/kicad-lib
Mon Jul 29 12:00:54 +0000 2019Replying to @nabijaczleweli
Seems like the Solvespace's STEP output doesn't include the surface colours (or KiCad doesn't understand them), but hey
Mon Jul 29 12:07:02 +0000 2019Replying to @app4soft
Sure! https://github.com/solvespace/solvespace/issues/452
Mon Jul 29 21:22:00 +0000 2019Whichever committee specified ISO-10303-21, I hope you're ashamed of yourselves, and I wish your lives to be filled with deep irredeemable regret for your axions.
Tue Jul 30 20:33:27 +0000 2019